User`s manual

5-7
Chapter 5: Chassis Setup and Maintenance
PS/2 Ports
USB Ports
Parallel Port
Serial/
COM Ports
VGA or
Video Port
LAN
Port
Figure 5-5: SC836 Chassis Port Panel
Installing an I/O Port Panel
Installing the I/O Panel
Remove the chassis cover.1.
Locate the I/O port panel.2.
Depending on your motherboard, you must remove the existing port shield 3.
and replace with the new one or use the existing the shield to slide the ports
through.
Connect the port panel to the motherboard following the motherboard docu-4.
mentation.
I/O Shield and Expansion Card Setup
The SC836 chassis includes space for an I/O shield and up to seven add-on/
expansion cards.
Figure 5-4: SC836 Chassis Rear Expansion Card Slots and I/O Ports
Expansion Card Slots
I/O Port Panel