User`s manual

5-3
Chapter 5: Chassis Setup and Maintenance
Removing Hard Drive Carriers from the Chassis
Removing HDD Carriers
Press the release button on the drive carrier. This extends the drive carrier 1.
handle.
Use the handle to pull the drive out of the chassis. When replacing the car-2.
rier, use the handle to lock the tray into place.
5-4 Installing the Hard Drives
The drives are mounted in drive trays to simplify their installation and removal from
the chassis.
Installing a Hard Drive to the Hard Drive Carrier
Installing an HDD into a Carrier
Remove the screws (2) securing the dummy drive to the drive tray and sepa-1.
rate the dummy drive.
Figure 5-2: Removing Dummy Drive from Carrier
Drive Carrier
Dummy Drive
Release Button