Manualshelf

User`s manual

ManualsBrandsSupermicro ManualsNetworkingSuperblade SBM-GEM-002 Gigabit Ethernet module
919293949596979899100
13
Chapter 7: 10-Gb Ethernet Switch Firmware
SNMP
Clicking on the SNMP link brings up the SNMP AGENT CONTROL SETTINGS page
(Figure 7-10). This page allows to choose either A
GENT, AGENTXSUBAGENT or DISABLE
BOTH. The sub links of the SNMP are classified as Agent or AgentX.
Switch Base MAC Address Specifies the switch’s Base MAC Address.
SNMP Engine ID Specifies the SNMP Engine ID used.
PIM Mode Specifies the PIM Mode used.
Snoop Forward Mode Specifies the Snoop Forward Mode used.
Default VLAN Identifier Specifies the Default VLAN Identifier used.
Figure 7-10. SNMP Agent Control Settings Page
Table 7-3. System Settings Page Parameters (Continued)
Parameter Description