User`s manual

Superblade Network Modules User’s Manual
190
Stack Settings
Clicking on the STACK SETTINGS tab brings up the STACK CONFIGURATION page
(Figure 7-150). Table 7-123 lists the parameters found on this page.
Figure 7-150. Stack Configuration Page
Table 7-123. Stack Configuration Page Parameters
Parameter Description
Switch ID
Unique number to identify switches. Make sure to use different switch
identifier for stack member switches.
Ports
The number of stacking ports. It is recommended to use two ports for
stacking to connect all stacking switches in daisy chain.
Priority
Priority of the switch to decide the master among stacked switches. PM
denotes preferred master. BM denotes backup master. PS denotes
preferred slave.
Stacking Used to Enable or Disable switch stacking. Default is Disable.