User`s manual

185
Chapter 7: 10-Gb Ethernet Switch Firmware
Static RP
Clicking on the STATIC RP tab opens the STATIC RP CONFIGURATION page
(Figure 7-146). Table 7-120 lists the parameters found on this page.
RP Threshold
Indicates the threshold value for the number of registered packets
received, which when exceeded, RP initiates switching to source specific
shortest path.
RP Switching Period
Indicates the time interval for which the registered packets are monitored
to initiate switching to SPT.
Figure 7-146. Static RP Configuration Page
Table 7-119. PIM Threshold Configuration Page Parameters (Continued)
Parameter Description