Manualshelf

User`s manual

ManualsBrandsSupermicro ManualsNetworkingSuperblade SBM-GEM-002 Gigabit Ethernet module
251252253254255256257258259260
Superblade Network Modules User’s Manual
172
Dynamic Multicast
The DYNAMIC MULTICAST link permits to enable/disable Dynamic Multicast at the switch
level and also at the per-port level. This essentially gives more control over the switch to
the users. Once you choose to enable the protocol on the switch, you can decide on the
ports on which the protocol needs to run.
It is also possible to enable/disable Restricted Group Registration on a per-port level.
This will enable you to restrict the multicast groups learnt through GMRP learning.
This page uses the following control tabs to configure the dynamic multicast:
• Dynamic Multicast
• Port Settings
By default, the D
YNAMIC MULTICAST tab is loaded.
Dynamic Multicast
Figure 7-135. Dynamic Multicast Global Configuration Page