User`s manual

157
Chapter 7: 10-Gb Ethernet Switch Firmware
RRDv6
The RRD6 link allows performing the RRD6 related configuration. This can be
accomplished through the following three control tabs.
•Filters
• OSPFv3
•RIP6
By default, the F
ILTERS tab is loaded.
Table 7-99. RRD OSPF Configuration Page Parameters
Parameter Description
OSPF Status Allows you to set redistribution for OSPF as Enabled/Disabled.
Import
Permits you to import Direct Routes, Static Routes, RIP Routes and
BGP Routes to OSPF.