User`s manual

Superblade Network Modules User’s Manual
134
Virtual Interface
Clicking on the VIRTUAL INTERFACE tab opens the OSPF VIRTUAL INTERFACE
C
ONFIGURATION page (Figure 7-105). Table 7-82 lists the parameters found on this page.
Figure 7-105. OSPF Virtual Interface Configuration Page
Table 7-82. OSPF Virtual Interface Configuration Page Parameters
Parameter Description
Transit Area ID Specifies the transit area that the virtual link traverses.
Neighbor Router ID Specifies the router ID of the virtual neighbor.
Authentication Type
You can choose MD5, Simple Password, or None as the authentication
type.
MD5 Key ID
Specifies the secret key used to create the message digest appended to
the OSPF packet if the authentication type is MD5.
Authentication Key
Specifies the key required for authentication, if authentication is enabled
on this interface.
Hello Interval
Specifies the length of time, in seconds, between the Hello packets sent on
the interface.