User`s manual

71
Chapter 7: 10-Gb Ethernet Switch Firmware
MSTP
The MSTP link leads you to the following control tabs:
• Basic Settings
•Timers
• Port Configuration
• VLAN Mapping
• Port Settings
• CIST Port Status
By default, the B
ASIC SETTINGS tab is loaded.
Basic Settings
Clicking on the BASIC SETTINGS tab brings up the MSTP GLOBAL CONFIGURATION page
(Figure 7-59). The MSTP global configuration can be accessed through this page.
Table 7-40 lists the parameters found on this page.
Figure 7-59. MSTP Global Configuration Page