User`s manual

Superblade Network Modules User’s Manual

Clicking on the HISTORY tab brings up the HISTORY CONTROL CONFIGURATION page

(Figure 7-23). Table 7-15 lists the parameters found on this page.

TACACS+ Server

The TACACS+ SERVER link allows you to configure TACACS+ Server parameters. The

following control tabs are available for configuration:

• Server Config

• Global Settings

By default, the S

ERVER CONFIG tab is loaded.

Table 7-15. History Control Configuration Page Parameters

Parameter Description

Index Specifies the index to the table.

Data Source

Specifies the SNMP object id of the variable on which the history is being

collected.

Buckets Requested

Indicates the number of buckets to be configured for collecting the RMON

statistics.

Buckets Granted Denotes the number of bucket granted for collecting the RMON statistics.

Interval

Specifies the time interval between two successive polling to collect the

statistics.

Owner Denotes the owner of the RMON group of statistics.

Status Specifies the status of History Control Entry as either Valid or Invalid.