User`s manual

29
Chapter 7: 10-Gb Ethernet Switch Firmware
Clicking on the EVENTS tab brings up the EVENT CONFIGURATION page (Figure 7-22).
Table 7-14 lists the parameters found on this page.
History
Table 7-14. Event Configuration Page Parameters
Parameter Description
Index Specifies the index to the Events table.
Description Describes the event.
Type
Specifies the event configured can be a Log, or an SNMP trap, or both, or
none.
Community
Specifies the SNMP community string used for this trap. This is relevant
when an SNMP trap is requested for an event.
Owner Indicates the owner of this event.
Last Time Sent Denotes the time this event entry last generated an event.
Figure 7-23. History Control Configuration Page