User`s manual
23
Chapter 7: 10-Gb Ethernet Switch Firmware
Table 7-10. SNMP Security Settings Page Parameters
Parameter Description
User Name
This field allows you to set the User Name, which is the (User-based
Security) Model dependent security ID.
Authentication Protocol
This drop-down list box allows you to set the Authentication Protocol,
which is the type of authentication protocol used for authentication.
Authentication Key
This field allows you to set the Authentication Key, which is the secret
authentication key used for messages sent on behalf of this user to/from
the SNMP.
Privacy Protocol
This drop-down list box allows you to set the Privacy Protocol, which is the
type of protocol that is used in this case.
Privacy Key
This field allows you to set the Privacy key, which is an indication of
whether messages sent on behalf of a user to/from the SNMP, can be
protected from disclosure.
Storage Type
This drop-down list box allows you to set the Storage Type, which can be
configured as Volatile or Non-Volatile.