User's Manual (1.0)
Chapter 5: Advanced Serverboard Setup
5-23
HDD/SATA LED (LE3)
Settings
Status Denition
On HDD/SATA Connected
Off No connection
InniBand Link LED (LEB1)
Settings
Color Status Denition
Green Solid InniBand Connected
Off Off No connection
InniBand Activity LED (LEB2)
Settings
Color Status Denition
Yellow Solid InniBand: Active
Yellow Dim InniBand: Connected,
Activity: Idle
Off Off No connection
InniBand LED Indicators
The X9DRT-PIBF serverboard
has two InfiniBand LED Indicators
(LEB1/LEB2) that are located on the
serverboard. The green LED (LEB1)
is the InniBand Link LED. The yellow
LED (LEB2) indicates activity. Refer to
the table on the right for details.
HDD/SATA LED (LE3)
An HDD/SATA LED Indicator is located
at LE3 on the serverboard. This LED
indicates the status of hard drive
activities or SATA activities. Also see
the layout below for the LED locations.
Onboard Power LED
An Onboard Power LED is located
at LE1 on the serverboard. When
this LED is on, the system is on. Be
sure to turn off the system and unplug
the power cord before removing or
installing components. See the tables
on the right for more information.
Onboard PWR LED Indicator (LE1)
LED Settings
LED Color Status
Off System Off (PWR cable
not connected)
Green System On
Green: Flashing
Quickly
ACPI S1 State
Rear UID LED
The rear UID LED is located at
UIDLED1 on the rear of the
serverboard. This LED is used in
conjunction with the rear UID switch to
provide easy identication of a system
that might be in need of service. Refer
to UID Switch on Page 5-18 for more
information.
UID LED (UIDLED1)
Status
Color/State OS Status
Blue: On Windows OS Unit Identied
Blue: Blinking Linux OS Unit Identied