User's Manual (1.0b)

1-2
SUPERSERVER 1027GR-TRF/1027GR-TRFT User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 1027GR-TRF/1027GR-TRFT server is the X9DRG-
HF/X9DRG-HTF, a dual processor serverboard based on the Intel C602 chipset.
Below are the main features of the X9DRG-HF/X9DRG-HTF. (See Figure 1-1 for a
block diagram of the chipset).
Processors
The X9DRG-HF/X9DRG-HTF supports two Intel Xeon E5-2600 series processors in
LGA 2011 sockets (Socket R). Please refer to the serverboard description pages on
our web site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9DRG-HF/X9DRG-HTF has eight DIMM slots that can support up to 512 GB
registered ECC LDIMMs or 256 GB of DDR3-1866/1600/1333/1066/800 RDIMMs.
Modules of the same size and speed are recommended. See Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the chipset to provide a 4-port SATA subsystem,
which is RAID 0, 1, 5 and 10 supported. Two of these are SATA 3.0 ports and two
are SATA 2.0 ports. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The X9DRG-HF/X9DRG-HTF has three PCI-Express 3.0 x16 slots to support
three double-width GPU cards. Additional slots support one PCI-Express 3.0 x8
low-profi le card.
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
• Supermicro product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety info: http://super-dev/about/policies/safety_information.cfm
• If you have any questions, please contact our support team at:
[e-mail]