Datasheet

Chapter 1: Introduction
1-7
Status monitor for fan speed & System Overheat/Fan Fail LED/Control
Pulse Width Modulation Fan Control & Low noise fan speed control
• SuperDoctor III, NMI
System Resource alert via SuperDoctor III
ACPI Features
Slow blinking LED for suspend state indicator
BIOS support for USB keyboard/Mouse
Main switch override mechanism
• External modem ring-on
Onboard I/O
One ATA/100 EIDE Channel
Intel ICH7R SATA Controller, 4 connectors for 4 devices with support of RAID
0, 1, 5 and 10 (*Note)
One fl oppy port interface (up to 2.88 MB)
One Fast UART 16550 compatible serial port
Two Intel single-port 82573 V/L PCI-E Gigabit Ethernet Controllers with two
GLAN ports (*82573L for LN1) (*Note)
PS/2 mouse and PS/2 keyboard ports
Up to 6 USB (Universal Serial Bus) 2.0 ports
• VGA Connector
• One IPMI 2.0 Slot (*Note)
• Super I/O (Winbond 83627 HG) with hardware monitoring
• XGI XG20 Graphics w/DDR 16 MB
Temperature
Monitoring CPU, chassis environment
• CPU Thermal Trip support
Thermal Monitor 2 (TM2) (available if supported by the CPU)
Other
• Wake-on-LAN (WOL)
• Wake-on-Ring (WOR)
Onboard Standby PWR warning LED Indicator ("LE 1")
CD Utilities
Drivers and software for Intel 3000 chipset utilities
Dimensions
• 9.6" (W) x 9.6" (L) (243.84 mmx 243.84 mm)
*Note: IPMI and LAN2 options are available on the PDSML-LN2+ only.