Datasheet

Appendix C: Software Installation
C-3
Using the LSI ICH6R SATA RAID Utility Driver
(*Note: Please refer to the LSI User's Guide, which is included in the CD
for installing the LSI SATA RAID Controller Driver. You can also down-
load a copy of the guide from our web site.)
Accessing the LSI SATA RAID Utility:
After the system exits from the BIOS Setup Utility, the system will automati-
cally reboot. To run the LSI Logic Embedded SATA RAID Setup Utility, press
the <CTRL> key and the <M> key simultaneously during system bootup as
shown in the screen below:
LSI SATA RAID Utility Main Menu
Once you've entered the LSI SATA RAID Setup Utility, the Main Menu of
the SATA RAID Setup Utility displays as shown below: