Datasheet

P8SCT User's Manual

4-8

4-4.3 I/O Device Conﬁ guration

Onboard Serial Port1/Onboard Serial Port2

This setting allows the user to set the address and the corresponding IRQ for

Serial Port1 or Serial Port 2. The options are Disabled, 3F8/IRQ4, 2F8/IRQ3,

3E8/IRQ4, 2E8/IRQ3, and Auto. The default setting for Serial Port1 is 3F8/IRQ4

and the default for Port 2 is 2F8/IRQ3.

Onboard Parallel Port

This setting allows the user to set the address and the corresponding IRQ for

the onboard parallel port. The options are Disabled, 378/IRQ7, 278/IRQ5 and

3BC/IRQ7.

Parallel Port Mode

This setting sets the onboard Parallel port mode. The options are SPP, EPP, ECP,

ECP+EPP and Normal.

EPP Mode Select

This setting allows the user to select the EPP port type. The options are EPP 1.9

and EPP 1.7.

ECP Mode Use DMA

This setting allows the user to select the DMA channel for the ECP mode (port) to

use. The options are 1 and 3.

Power On Function

This setting allows the user to decide which method to use to power on the

system. The options are Password, Hot Key, Mouse Left, Mouse Right, Any Key,

and Button Only.

KB Power On Password

This setting allows the user to enter the Password when the system is powered

on via keyboard.

Hot Key Power On

This setting allows the user to decide which hot-keys to use in order to power

on the system. The options are Ctrl-F1, Ctrl-F2, Ctrl-F3, Ctrl-F4, Ctrl-F5, Ctrl-F6,

Ctrl-F7, and Ctrl-F8.