Datasheet

Chapter 4: BIOS

4-7

On-Chip Serial ATA

Select Disabled to disable the SATA Controller. Select Auto to allow the BIOS to

conﬁ gure the SATA Controller automatically. Select Combined Mode to use PATA and

SATA Combined Mode. The maximum of 2 IDE drives in each channel is allowed.

Select Enhanced Mode to enable both SATA and PATA. This mode will support up

to 6 IDE drives. Select SATA Only to allow SATA to operate in Legacy Mode.

PATA IDE Mode

When the item -On-chip Serial ATA is set to Combined Mode, the user can select

either Primary or Secondary for Parallel ATA IDE. The options are Primary and

Secondary. If On-chip Serial ATA is set to Enhanced Mode, only Serial ATA will

be activated, and Primary PATA IDE will be available. Secondary PATA IDE will

not be available.

SATA Port

This setting allows you conﬁ gure the setting for the SATA port. The options are P1

and P3 is Secondary.

USB Controller

This setting allows you to enable or disable the USB Controller. The options are

Enabled, and Disabled.

USB 2.0 Controller

This setting allows you to enable or disable USB 2.0 (EHCI) Controller. The options

are Enabled, and Disabled.

USB Legacy Support

This setting allows you to enable or disable the functions of USB, Keyboard/Mouse

under POST and DOS. The options are Disabled, and Enabled.