Datasheet

P8SCT User's Manual
4-4
IDE HDD Auto-Detection
Select Auto to enable the Auto-Detection function for the devices installed in
Channel 0 to IDE Channel 3. The options are None, Auto and Manual.
IDE Channel 0 to IDE Channel 3 Master
Press the <Enter> key to activate the 'IDE HDD Auto-Detection function, which
will allow the BIOS to automatically detect the status of the IDE HDD installed
in the system, such as the size, the number of cylinders, the confi gurations of
items such as Head, Precomp, Landing Zone and Sector. The options are None,
Auto and Manual.
Access Mode
This item sets the location through which the AwardBIOS accesses the IDE
Primary Master Device. The settings are CHS, LBA, Large, and Auto.
Halt On
This item allows the user to select the situation in which the BIOS will stop the
POST process and notify you about the status of the system. The settings are All
Errors, No Errors, All, But Keyboard, All, But Diskette, and All, But Disk/Key.
Total Physical Memory/Total System Resources/Total Available
Memory
These are displays that inform you how much of each type of memory is recognized
as being present in the system.