Datasheet

2-6

P8SCT User's Manual

Figure 2-2. Side and Top Views of DDR2 Module Installation into Slot

To Install:

Insert module

vertically and

press down

until it snaps

into place.

Pay attention

to the notch.

To Remove:

Use your thumbs

gently to push

each release tab

outward to release

the DIMM from

the slot.

DDRII Slot

(Top View)

Support

The P8SCT supports Dual/Single channel, ECC/Non ECC, unbuffered DDR2

533/400 SDRAM. Both interleaved and non-interleaved memory are support-

ed, so you may populate any number of DIMM slots. (Populating DIMM#1A,

DIMM#2A, and/or DIMM#1B, DIMM#2B with memory modules of the same size

and of the same type will result in dual channel, two-way interleaved memory

which is faster than single channel, non-interleaved memory.)

2-4 Installing DDR2 Memory

CAUTION

Exercise extreme care when installing or removing memory modules

to prevent any possible damage.

Memory Module Installation (See Figure 2-2)

1. Insert each DDR2 memory module vertically into its slot. Pay attention to the

notch along the bottom of the module to prevent inserting the module incor-

rectly. (See support information below.)

2. Gently press down on the memory module until it snaps into place.

DDR2 Slot