Datasheet

Chapter 1: Introduction
1-5
P8SCT Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear See Chapter 2
JP1, JP2 SMBus To PCI Open (Disabled)
JP3 PCI-X Frequency Close (133MHz)
JPF Power Force-On Open (Normal)
JPL1/JPL2 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JFSB1/JFSB2 Front Side Bus Speed Pins 1-2/Pins 1-2(Auto)
JPUSB1/JPUSB2 *USB Wake-Up Enable Pins 2-3 (Disabled)
(*JPUSB1:USB 1/2, JPUSB2:USB 3/4, 5/6)
JPWAKE1 KB/Mouse Wake-Up Pins 1-2 (Enabled)
JWD
Watch Dog Pins 1-2 (Reset)
Connectors Description
ATX Power (PW1) 24-Pin Power Connector
4-Pin Power (PW2) 4-Pin Power Connector
COM1, COM2 COM Port/Serial Port 1 & Port 2 Connectors
Fans 1-5 Fan5: CPU Fan, Fan1-4: Chassis Fan Headers
DIMM#1A,#1B,#2A,#2B Memory (DIMM) Slots (1 through 4)
Floppy Floppy Disk Connector
IDE IDE Connector
IPMI IPMI 2.0 Socket
J9 Internal Speaker (Buzzer)
JF1 Front Panel Control
JL1 Chassis Intrusion Header
JK1 Keylock Header
JLED Power LED Connector
JSLED SATA LED Connector
JWOL Wake-On LAN
JWOR Wake-On-Ring Header
KB/MS(J14) PS/2 Keyboard/Mouse
LE1 Onboard +5V Standby Warning LED
GLAN1/GLAN2 Giga-bit Ethernet RJ45 (LAN1/LAN2) Connectors
Parallel Printer Port
PCI slots One: PCI-X 64bit/133MHz, Five: PCI-32 bit/33 MHz
slots
SATA #0-3 4 SATA Headers
USB 1/2 Back Panel Universal Serial Ports1/2
USB 3/4, USB 5/6 Front Panel USB Headers:USB3/4(J10), USB5/6(J7)
VGA Video/Graphic Connector
(*See Chapter 2 for detailed pin information and jumper settings.)