Datasheet

P8SAA User's Manual
4-8
4-4.3 I/O Device Configuration
Onboard Serial Port1/Onboard Serial Port2
This setting allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The options are Disabled , 3F8/IRQ4,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, and Auto. The default setting for Serial Port1
is 3F8/IRQ4 and the default setting for Port 2 is 2F8/IRQ3.
UART Mode Select
This setting allows the user to select the UART mode for the BIOS. The
options are IrDA, ASKIR and Normal.
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ
for the onboard parallel port. The options are Disabled, 378/IRQ7, 278/IRQ5
and 3BC/IRQ7.
Parallel Port Mode
This setting sets the mode for the onboard Parallel port. The options are
SPP, EPP, ECP, ECP+EPP and Normal.
Power On Function
This setting allows the user to decide which method to use to power on the
system. The options are Password, Hot Key, Mouse Left, Mouse Right, Any
Key, Button Only and Keyboard 98.