Datasheet

28 Datasheet
NOTES:
1. The V
CC_MIN
and V
CC_MAX
loadlines represent static and transient limits. Please see Section 2.11.1 for V
CC
overshoot specifications.
2. This table is intended to aid in reading discrete points on Figure 3.
3. The loadlines specify voltage limits at the die measured at the VCCSENSE and VSSSENSE pins. Voltage
regulation feedback for voltage regulator circuits must be taken from processor V
CC
and V
SS
pins. Refer to
the Voltage Regulator Module (VRM) and Enterprise Voltage Regulator Down (EVRD) 10.0 Design
Guidelines for socket loadline guidelines and VR implementation.
Table 10. V
CC
Static and Transient Tolerance
ICC
Voltage Deviation from VID Setting (V)1
,
2
,
3
VCC_Max VCC_Typ VCC_Min
0 VID - 0.000 VID - 0.020 VID - 0.040
5 VID - 0.006 VID - 0.026 VID - 0.046
10 VID - 0.013 VID - 0.033 VID - 0.052
15 VID - 0.019 VID - 0.039 VID - 0.059
20 VID - 0.025 VID - 0.045 VID - 0.065
25 VID - 0.031 VID - 0.051 VID - 0.071
30 VID - 0.038 VID - 0.058 VID - 0.077
35 VID - 0.044 VID - 0.064 VID - 0.084
40 VID - 0.050 VID - 0.070 VID - 0.090
45 VID - 0.056 VID - 0.076 VID - 0.096
50 VID - 0.063 VID - 0.083 VID - 0.103
55 VID - 0.069 VID - 0.089 VID - 0.109
60 VID - 0.075 VID - 0.095 VID - 0.115