Datasheet

24 Datasheet
2.11 Processor DC Specifications
The processor DC specifications in this section are defined at the processor core (pads) unless
noted otherwise. See Section 5.1 for the Low Voltage Intel
®
Xeon™ processor with 800 MHz
system bus pin listings and Section 4.1 for signal definitions. Voltage and current specifications are
detailed in Table 9. For platform power delivery planning refer to Table 10, which provides V
CC
static and transient tolerances. This same information is presented graphically in Figure 3.
BSEL[1:0] and VID[5:0] signals are specified in Table 12. The DC specifications for the AGTL+
signals are listed in Table 13. The DC specifications for the PWRGOOD input and TAP signal
group are listed in Table 14 and the Asynchronous GTL+ signal group is listed in Table 15.
Table 9 through Table 15 list the DC specifications for the processor and are valid only while
meeting specifications for case temperature (T
CASE
as specified in Section 6.0), clock frequency,
and input voltages. Care should be taken to read all notes associated with each parameter.