Datasheet

Datasheet 23
2.10 Absolute Maximum and Minimum Ratings
Table 8 specifies absolute maximum and minimum ratings. Within functional operation limits,
functionality and long-term reliability can be expected.
At conditions outside functional operation condition limits, but within absolute maximum and
minimum ratings, neither functionality nor long term reliability can be expected. If a device is
returned to conditions within functional operation limits after having been subjected to conditions
outside these limits, but within the absolute maximum and minimum ratings, the device may be
functional, but with its lifetime degraded depending on exposure to conditions exceeding the
functional operation condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality nor long-
term reliability can be expected. Moreover, if a device is subjected to these conditions for any
length of time then, when returned to conditions within the functional operating condition limits, it
will either not function, or its reliability will be severely degraded.
Although the processor contains protective circuitry to resist damage from static electric discharge,
precautions should always be taken to avoid high static voltages or electric fields.
NOTES:
1. For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must
be satisfied.
2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.
3. Storage temperature is applicable to storage conditions only. In this scenario, the processor must not receive
a clock, and no pins can be connected to a voltage bias. Storage within these limits will not affect the long-
term reliability of the device. For functional operation, please refer to the processor case temperature
specifications.
4. This rating applies to the processor and does not include any tray or packaging.
Table 8. Absolute Maximum and Minimum Ratings
Symbol Parameter Min. Max. Unit Notes
1,2
V
CC
Core voltage with respect to VSS -0.30 1.55 V
V
TT
System bus termination voltage with
respect to V
SS
-0.30 1.55 V
T
CASE
Processor case temperature See
Section 6.0
See
Section 6.0
°C
T
STORAGE
Storage temperature -40 85 °C 3, 4