User`s guide

3-7
Chapter 3: Configuration and Installation
Configuring for Configuration-2
To configure the SC743 air shroud for an Intel Xeon DP 5500/5400/5100/5000 series
systems with 7 PCI add-on card slots, up to 12 memory DIMM slots and a 12” x 13” form
factor, use Configuration-2. This configuration attaches component part B one slot
deeper than the edge of component part A, and mounts component part D to the
underside of component part A (see Figure 3-6).
This configuration is optimized for Supermicro X8Dxx/X7Dxx series mainboards.
Figure 3-6. Configuration-2
Component Part D
Component Part B