User`s guide

SC743 Air Shroud User’s Guide
3-6
Configuring for Configuration-1
To configure the SC743 air shroud for an Intel Xeon DP 5500/5400/5100/5000 series
systems with 6 PCI add-on card slots, up to 12 memory DIMM slots and a 12” x 13” form
factor, use Configuration-1. This configuration attaches component part B flush with the
edge of component part A, and mounts component parts D to the underside of
component part A (see Figure 3-5).
This configuration is optimized for Supermicro X8Dxx/X7Dxx series mainboards.
Figure 3-5. Configuration-1 (Default)
Component Part D
Component Part B