User`s manual
4-20
X9SCV-Q User's Manual
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <En-
ter>. This enables the user to save any changes to the BIOS setup for future use
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <En-
ter>. Use this feature to retrieve user-dened settings that were saved previously.
Boot Override
Set this feature to override a previously dened boot device. The available devices
will be listed below.
LaunchEFIShellfromlesystemdevice
This feature when initiated, will attempt to launch an EFI shell application (shellx64.
e) from one of the available le system devices. Press <Enter> to activate.
Set ME to Disable Mode
Select this feature and choose Enabled to run Management Engine (ME) recovery
mode on reboot. The options are Disabled and Enabled.