User`s manual
4-12
X9SCV-Q User's Manual
Resolution 100x31: Disabled or Enabled
Legacy OS Redirection Resolution: 80x24 or 80x25
Out-of-Band Mgmt Port
Use this feature to select which port to activate Microsoft Windows Emergency
Management Services (EMS). The options are COM1, COM2 and COM3 (PCI
Dev0,Func0).
Terminal Type
Use this feature to select what terminal emulation to use with Remote Access. The
options are ANSI, VT100, VT100+, or VT-UTF8.
The following are for information only and cannot be changed:
Data Bits: 8 or 7
Parity: None, Even, Odd, Mark, or Space
Stop Bits: 1 or 2
Hardware Health Conguration
This feature allows the user to monitor Hardware Health of the system and review
the status of each item when displayed.
Fan Speed Control Mode
This feature allows the user to decide how the system controls the speed of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase for effective
system cooling. Select Full Speed to allow the onboard fans to run at full speed all
the times. Select Standard for the onboard fans to run initially at 50% in order to
balance the needs between system cooling and power saving, then automatically
adjust speed as needed by the system. This setting is recommended for regular
systems with normal hardware congurations. The options are Full Speed and
Standard.
CPU Temperature
The CPU Temperature feature will display the CPU temperature status as detected
by the BIOS.
Low – This level is considered as the ‘normal’ operating state. The CPU temperature
is well below the CPU ‘Temperature Tolerance’. The motherboard fans and CPU will
run normally as congured in the BIOS (Fan Speed Control).
User intervention: No action required.