User`s manual

2-24
X9SCV-Q User's Manual
A
LAN Port 1 Enable
LAN Port 2 Enable
JI
2
C1/JI
2
C2
Power Force On
LAN Port Enable/Disable
JPL1/JPL2 is used to enable or disable LAN
Port1 and/or LAN Port2 on the motherboard.
See the table on the right for jumper settings.
The default setting is enabled.
GLAN Enable
Jumper Settings
Pin# Denition
1-2 Enabled (default)
2-3 Disabled
B
B
A
SMB (I
2
C) Bus to PCI Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to con-
nect the System Management Bus (SMB) to
PCI-E and PCI slots. The default setting is
set to Disabled. See the table on the right for
jumper settings.
I
2
C to PCI-Slots
Jumper Settings
Jumper Denition
On Enabled
Off Disabled (Default)
C
C
Power Force On Enable/Disable
Jumper JPF1 allows you to enable (force on)
or disable the Power Force On function. If en-
abled, the power will always stay on automati-
cally. If this function is disabled (the normal
setting), the user needs to press the power
button to power on the system.
Power Force On
Enable/Disable
Jumper Settings
Jumper Setting Denition
Open Normal
Closed Force On
D
D