User`s manual

Chapter 2: Installation
2-19
SATA DOM Power
SMB I2C Connector
A
B
A
SATA DOM Power
The SATA DOM Power on JWF1 is used
to supply power to SATA Disk-on-Module
(DOM) solid-state storage devices.
B
Power SMB I
2
C Connector
Power System Management Bus (I
2
C)
Connector on J15 monitors the status
of the power supply, fan and system
temperature. See the table on the right
for pin denitions.
PWR Supply I
2
C
PinDenitions
Pin# Denition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V
SATA DOM Power
PinDenitions
Pin# Denition
1 +5V
2 Ground
3 Ground