User`s manual

2-4
X9SCV-Q User's Manual
Installing and Removing DIMMs
2-3 System Memory
CAUTION
Exercise extreme care when installing or removing
DIMM modules to prevent any possible damage.
How to Install SO DIMMs
Insert the desired number of SO DIMMs into the memory slots, starting with 1.
DIMM1, then DIMM2. Pay attention to the notch along the bottom of the mod-
ule to prevent incorrect DIMM module installation.
Insert each DIMM module at an angle vertically and snap it into place. Repeat 2.
step 1 to install DIMM2 if needed. See instructions on the next page.
Memory Support
The X9SCV-Q supports up to 16GB of unbuffered Non-ECC DDR3 SODIMMs
(1066/1333 MHz in 2 SODIMM slots).
Note: Check the Supermicro website for a list of memory modules that
have been validated with the X9SCV-Q motherboard.
DIMM1
DIMM2