User`s manual
Chapter 3: Installation
3-9
P1-DIMM7A
FAN
5
P2-DIMM3A
BMC CTRL
LAN CTRL
Intel 82576
Winbond
JPRST1
Intel
IOH 7500
LSI 2108
SAS CTRL
Intel ICH 10R
Battery
BIOS
J59
BBU
LED5
LED6
LED7
LED8
LED9
P5V_STBY
OHLED
JOH1
BT2
SP1
JP10
JBT1
JP1
JLPC1
JP4
JP5
JP6
X8QBE-F
Rev. 1.11
FAN 11
U70
JPWR3
I-SATA1
I-SATA3
I-SATA2
LED26
JPWR1JPWR2
JPWR5
JPWR4
JPI2C1
JWD1
JPL1
JPB1
JPS1
JPG1
JPT1
JL1
1
J35
J40
JUID_OW1
U101
JUIDB1
D10
Slot2 PCI-E 2.0 X16/X8
(UPPER)
(LOWER)
VGA
COM1
JD1
JWOR
BMCRST
JP3
LAN2
I-SATA5
I-SATA4
I-SATA0
PORT80
USB2/3
USB5
Slot3 PCI-E 2.0 X8
Slot1 PCI-E 2.0 X8
Slot4 PCI-E 2.0 X16/X8
JF1
IPMB
COM2
FAN2
FAN1
FAN3
FAN4
FAN6
FAN7
FAN10
FAN8
FAN9
LAN1
USB0/1
IPMI_LAN
SAS4~7
SAS0~3
P3-DIMM1A
P3-DIMM8A
P3-DIMM7A
P3-DIMM6A
P3-DIMM5A
P3-DIMM4A
P3-DIMM3A
P3-DIMM2A
P4-DIMM5A
P4-DIMM6A
P4-DIMM7A
P4-DIMM8A
P4-DIMM1A
P4-DIMM2A
P4-DIMM3A
P4-DIMM4A
P2-DIMM6A
P2-DIMM5A
P2-DIMM8A
P2-DIMM7A
P2-DIMM1A
P2-DIMM2A
P2-DIMM4A
P1-DIMM8A
P1-DIMM6A
P1-DIMM5A
P1-DIMM4A
P1-DIMM3A
P1-DIMM2A
P1-DIMM1A
CPU1
CPU2
CPU3
UID_SWITCH
CPU4
UID_LED
BMC_HB
3-4 Motherboard Installation
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
Phillips Screwdriver•
Pan head screws (17 pieces)•
Standoffs (17 pieces)•
Additional Standoffs Holes marked with grey arrows •
(3 locations on the chassis, if needed)
Location of Mounting Holes
There are 17 mounting holes on this motherboard indicated by the arrows.
Caution: 1) To avoid damaging the motherboard and its components,
please do not use a force greater than 8 lb/inch on each mounting screw
during motherboard installation. 2) Some components are very close to the
mounting holes. Please take precautionary measures to prevent damage
to these components when installing the motherboard to the chassis.