User`s manual

2-6
X8QB6-F/X8QBE-F Motherboard User’s Manual
Warning!
To prevent damage to the power supply or motherboard, please use a power
•
supply that contains a 24-pin and at least three 8-pin power connectors. Be
sure to connect these power supply connectors to the 24-pin power connector
(JPWR3) and three of the 8-pin power connectors (JPWR1, JPWR2, JPWR4
or JPWR5) on the motherboard. Failure in doing so will void the manufacturer
warranty on your power supply and motherboard.
Note 1: To enable extended battery backup support for onboard SAS,
please purchase a LSI 2108 SAS Battery Accessory kit from Supermicro.
Refer to Page 3-26 in Chapter 3 for more details.
Note 2: To ensure adequate power supply to the motherboard for proper
system operation, please use a power supply that supports the following
specifi cations:
Type Minimum Requirement
12V 1400 Watts (minimum)
5V Standby 6A (minimum)
T-SGPIO 1/2 Serial_Link General Purpose I/O Headers
BP USB 0/1 Back Panel USB 0/1
USB 2/3, USB 5 Front Panel Accessible USB Connections
UID Switch UID (Unit Identifi er) Switch
VGA Backpanel VGA Port
X8QB6-F/X8QBE-F LED Indicators
LED Description State Status
D10 BMC Heartbeat LED Green: Blinking Normal
LED 8 Standby PWR LED Green: On SB Power On
LED 26 UID LED
Blue: On (Windows OS),
Blinking (Linux)
Unit Identifi ed