User`s manual

Chapter 2: Overview

2-5

X8QB6-F/X8QBE-F Jumpers

Jumper

Description Default Setting

JBT1

Clear CMOS See Chapter 3

JPB1 BMC Enabled Pins 1-2 (Enabled)

JPG1 VGA Enabled Pins 1-2 (Enabled)

JPL1 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)

JPRST1 BMC Reset Off (Normal)

JPS1 (X8QB6-F only) SAS2 Enabled Pins 1-2 (Enabled)

JPT1 TPM Enabled Pins 1-2 (Enabled)

JWD1 Watch Dog Pins 1-2 (Reset)

X8QB6-F/X8QBE-F Connectors

Connectors Description

BT2 Onboard Battery (See Chpt. 4 for Used Battery Disposal)

COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header

FAN1~11 CPU/System Fan Headers (Fan1~Fan10)

(Fan11: Reserved)

IPMB 4-pin External BMC I

C Header (for an IPMI Card)

I-SATA 0~5 Intel SB SATA Connectors 0~5

J59 (BBU) (X8QB6-

F only)

LSI SAS Battery Backup Unit (BBU) (See Note on Pg.2-6,

3-26)

JD1 Speaker/Power LED Indicator

JF1 Front Panel Control Header

JL1 Chassis Intrusion

JLPC1 LPC Port 80

JOH1 Overheat/Fan Fail LED

JPI

C1 Power Supply SMBbus I

C Header

JPWR1~2,

JPWR4~5

12V 8-Pin Power Connectors (See Warning on Pg. 2-6.)

JPWR3 ATX 24-Pin Power Connector (See Warning on Pg. 2-6.)

JUID_OW1 UID Override Header

JWOR Wake-On-Ring Header

LAN1/LAN2 G-bit Ethernet Ports 1/2

(IPMI) LAN IPMI_Dedicated LAN

SAS 0~3, 4~7 Serial_Attached_SCSI Connectors 0~3, 4~7 (X8QB6-F)

SP1 Onboard Buzzer (Internal Speaker)

Slot1, Slot3 PCI-Express 2.0 x8

Slot2, Slot4 PCI-Express 2.0 x16/x8