User`s manual

2-4
X8DTU/X8DTU-F User's Manual
Socket Keys
After removing the plastic cap, 1.
using your thumb and the index
fi nger, hold the CPU at the
north and south center edges.
Align the CPU key, the semi-2.
circle cutout, against the socket
key, the notch below the gold
color dot on the side of the
socket.
Once both the CPU and the 3.
socket are aligned, carefully
lower the CPU straight down
into the socket. (Do not rub the
CPU against the surface of the
socket or its pins to avoid dam-
aging the CPU or the socket.)
With the CPU inside the socket, 4.
inspect the four corners of the
CPU to make sure that the CPU
is properly installed.
Once the CPU is securely 5.
seated on the socket, lower the
CPU load plate to the socket.
Use your thumb to gently push 6.
the socket clip down to the clip
lock.
Warning: Please save the
plastic cap. The mother-
board must be shipped
with the plastic cap prop-
erly installed to protect the
CPU socket pins. Ship-
ment without the plastic
cap properly installed will
cause damage to the sock-
et pins.
CPU CPU SocketLoad Plate
CPU Keys