User`s manual

Chapter 4: AMI BIOS
4-23
Memory Error Log
Use this option to enable memory. error logging. The options are Yes and No.
4-4 Security Settings
The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Select Full Access to grant the User full access to the Setup Utility, and change
Setup settings. Select View Only to allow the user access to the Setup Utility and
view the settings without making changes. Select Limited to allow the user to change
selected settings such as Date and Time. Select No Access to prevent the User
from accessing the Setup Utility.