User`s manual

Chapter 4: AMI BIOS
4-21
SEL Record ID•
SEL Record Type•
Event Timestamp•
Generator ID•
Event Message Format Version•
Event Sensor Type•
Event Sensor Number•
Event Directory Type•
Event Data.•
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel
to keep the BMC System log. The options are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure
that you no longer need any data stored in the log before clearing the
BMC Event Log.
Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address as shown
in the following graphics.
Channel Number - Enter the channel number for the SET LAN Confi g command.
This is initially set to [1].
Channel Number Status - This feature returns the channel status for the
Channel Number selected above: "Channel Number is OK" or "Wrong Channel
Number".
IP Address Source
This features allows the user to decide how an IP address is assigned to a
client computer or network device. Select DHCP (Dynamic Host Confi guration
Protocol) to allow a client (computer or device) to obtain an IP address from a
DHCP server that manages a pool of IP addresses and network information on
a "request and grant" basis. Upon time-out (or lease expiration), the IP address
assigned to the client can be reassigned to a new client. Select Static (Static