User`s manual

4-12

X8DTU/X8DTU-F User’s Manual

Route Port 80h Cycle to

Use this item to decide where to route Port 80h Cycle to. The Options are LPC

and PCI.

IDE/Floppy Conﬁ guration

When this submenu is selected, the AMI BIOS automatically detects the presence

of the IDE or Floppy devices and displays the following items:

SATA#1 Conﬁ guration

If Compatible is selected, SATA#1 will be set to a legacy compatibility mode. Select

Enhanced to set SATA#1 to the native SATA mode. The options are Disabled,

Compatible and Enhanced.

Conﬁ gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE, RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID

Code Base will appear. When the option-AHCI is selected, the item-SATA AHCI

will be available.)

ICH RAID Code Base (Available when the option-RAID is selected.)

Select Intel to enable Intel's SATA RAID ﬁ rmware to conﬁ gure Intel's SATA RAID

settings. Select Adaptec to enable Adaptec's SATA RAID ﬁ rmware to conﬁ gure

Adaptec's SATA RAID settings. The options are Intel and Adaptec.

SATA AHCI (Available when the option-AHCI is selected.)

Select Enable to enable the function of Serial ATA Advanced Host Interface.

(Take caution when using this function. This feature is for advanced program-

mers only.)

SATA#2 Conﬁ guration (Available when the option-IDE is selected.)

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled,

and Enhanced.

IDE Detect Timeout (sec)

Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI

devices installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and

35.

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master,

and Fourth IDE Master

These settings allow the user to set the parameters of Primary IDE Master/Slave,

Secondary IDE Master/Slave, Third and Fourth IDE Master slots. Press <Enter> to