User`s manual

Chapter 1: Introduction
1-7
CPU thermal trip support for processor protection, power LED
Power-up mode control for recovery from AC power loss
Auto-switching voltage regulator for CPU cores
System overheat/Fan Fail LED Indicator and control
System resource alert via Supero Doctor III
ACPI Features
Slow blinking LED for suspend state indicator
Main switch override mechanism
ACPI Power Management
Keyboard Wakeup from Soft-off
Onboard I/O
Intel ICH10R supports six SATA ports (with RAID0, RAID1, RAID10, RAID5
supported in the Windows OS Environment and RAID 0, RAID 1, RAID 10 sup-
ported for the Linux OS)
Winbond WPCM450 BMC (Baseboard Management Controller) supports IPMI
2.0 with KVM support (For the X8DTT-HF+/-HEF+/-HIBXF+/-HIBQF+ only)
Dual Intel 82574 Dual-LAN Gigabit Ethernet Controllers support dual Giga-bit
LAN ports
Onboard PHY Chip supports IPMI dedicated LAN (For the X8DTT-HF+/-HEF+/-
HIBXF+/-HIBQF+ only)
One COM port
In niBand Connector (For the X8DTT-HIBXF+/-HIBQF+ only)
Up to four USB 2.0 (Universal Serial Bus) connections (2 Rear USB Ports and
1 Type A Header w/2 USB connections supported)
Super I/O: Winbond W83527HG
Other
Console redirection
Onboard Fan Speed Control by Thermal Management via BIOS
CD/Diskette Utilities
BIOS ash upgrade utility and device drivers
Dimensions
Proprietary 16.64" (L) x 6.80" (W) (422.66 mm x 172.72 mm)