User`s manual

2-34
X8DTT/-F/-IBX/-IBXF/-IBQ/-IBQF User's Manual
JF1
LE4
SW1
J18
JWR2
JWR1
FAN2
FAN1
FAN4
JP10
JWOL1
J19
JWD1
J119
JPL1
JPG1
JPEN1
JBT1
LEB1
LEB2
LE2
JBAT1
JNMI1
JSPK1
J_UID_OW
T-SGPIO0
I-SATA5
I-SATA4
P1 DIMM3B
P2 DIMM1A
P1 DIMM3A
P2 DIMM1B
P1 DIMM2B
P2 DIMM2A
P1 DIMM2A
P2 DIMM2B
P1 DIMM1B
P2DIMM3A
P2DIMM3B
VGA
COM1
LAN2
LAN1
USB0/1
IPMI_LAN
PCI-E 2.0 GEN2 X16
CPU2
I-SATA3
I-SATA1
IPMB
USB2/3
I-SATA0
PWR I2C
CPU1
T-SGPIO1
P1 DIMM1A
FAN3
Battery
X8DTT Series
BIOS
I-SATA2
Intel
5520/5500
Intel
ICH-10R
Nuvoton
WPCM450
PHY
InfiniBand CTRL
LAN CTRL
InfiniBand
Connector
4-pin PWR
(North Bridge)
(South Bridge)
JTPM1
LE1
Rev. 2.0
JBMC1JPB
GLAN LEDs
There are two GLAN ports on the motherboard.
An additional IPMI dedicated LAN port is also
located on the X8DTT-F/-IBXF/IBXQF. Each
Gigabit Ethernet LAN port has two LEDs. The
yellow LED indicates activity, while the Link
LED may be green, amber or off to indicate
the speed of the connection. See the tables at
right for more information.
Note: IPMI dedicated LAN does not
operate at 1 Gbps.
2-8 Onboard Indicators
Activity
LED
GLAN Link Indicator
LED Settings
LED Color Defi nition
Off No Connection or 10 Mbps
Green 100 Mbps
Amber 1 Gbps
Link
LED
GLAN Activity Indicator
LED Settings
Color Status Defi nition
Yellow Flashing Active
Rear View (when facing the
rear side of the chassis)
A
B
A. LAN 1
B. LAN 2
C. IPMI dedicated LAN
D. BMC LED
A
B
C
BMC Heartbeat LED (X8DTT-F/IBX-F/IBQF)
A BMC Heartbeat LED is located at LE2 on
the motherboard. When LE2 is blinking, BMC
(Baseboard Management Controller) func-
tions normally. See the tables at right for more
information.
BMC Activity LED
Indication
Color/Status Defi nition
Green: Blinking BMC: Normal.
D