User`s manual

4-12
X8DTL-6/X8DTL-6F/X8DTL-L/X8DTL-6L User's Manual
Route Port 80h Cycles to
This feature allows the user to decide which bus to send debug information to. The
options are Disabled, PCI and LPC.
IDE/SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE devices and displays the following items:
SATA#1 Confi guration
Select Compatible to set SATA#1 to legacy compatibility mode. Select Enhanced
to set SATA#1 to native SATA mode. The options are Disabled, Compatible and
Enhanced.
Confi gure SATA#1 as
This feature is used to select the drive type for SATA#1. The options are IDE,
RAID and AHCI. (When RAID is selected, the items: "AHCI CodeBase" and
"ICH RAID Code Base" will appear. When AHCI is selected, the item "AHCI
CodeBase" will be available.)
AHCI CodeBase (Available when RAID or AHCI is selected)
Select BIOS Native Module to use BIOS Native Mode for AHCI Interface
(Advanced Host Controller Interface). Select Intel AHCI ROM to use the
Intel AHCI ROM for AHCI Interface. (Take caution when using this function
because it is for advanced programmers only.) The options are BIOS Na-
tive Module and Intel AHCI ROM. If the item is set to "IDE", the following
item will display.
ICH RAID Code Base (Available when the option-RAID is selected)
Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel SATA
RAID settings. Select Adaptec to enable Adaptec's fi rmware to confi gure
Adaptec SATA RAID settings. The options are Intel and Adaptec.
SATA#2 Confi guration (Available when the option "IDE" is selected)
Select Enhanced to set SATA#2 to native SATA mode. The options are Disabled,
and Enhanced.
IDE Detect Timeout (sec)
Use this item to set the timeout value for the BIOS to detect the ATA, ATAPI devices
installed in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35.