User`s manual

Chapter 4: AMI BIOS

4-23

4-4 Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass-

words, the Supervisor password must be set ﬁ rst.

Supervisor Password

This item indicates if a Supervisor password has been entered for the system. "Not

Installed" means a Supervisor password has not been used.

User Password

This item indicates if a user password has been entered for the system. "Not In-

stalled" means that a user password has not been used.

Change Supervisor Password

Select this feature and press <Enter> to access the submenu, and then enter a

new Supervisor Password.

User Access Level (Available when Supervisor Password is set as above)

The Options are Full Access, View Only, Limited, and No Access

Full Access

• : This feature grants the user the full read and write access to the

Setup Utility.

View Only: This feature allows the user to access the Setup Utility without mak-

•

ing any change to the settings.

Limited: This feature allows the user to access limited ﬁ elds and making

•

changes.