User`s manual
4-20
X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
Execute TPM Command
Select Enabled to allow the user to change executable TPM commands and TPM
settings. Select Don't Change to keep the current TPM settings. The options are
Don't Change, Enabled, and Disabled.
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
IPMI Confi guration
Intelligent Platform Management Interface (IPMI) is a used to monitor and manage
system health from a remote site. For more information, please visit Intel's website
at www.intel.com.
IPMI Firmware Revision
This item displays the current IPMI fi rmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between system
management software and platform hardware. This section displays the BMC
status codes.
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total number
of entries of BMC System Events. To view an event, press the <+> and <-> keys
to select an event from the even log and display the information.
Total Number of Entries
•
SEL Entry Number•
SEL Record ID•
SEL Record Type•
Event Timestamp•
Generator ID•
Event Message Format Ver.•