User`s manual

4-20
X8DA3/X8DAi User’s Manual
To view an event, select an Entry Number and press <Enter> to display the informa-
tion as shown in the screen.
SEL Entry Number
•
SEL Record ID•
SEL Record Type•
Event Timestamp•
Generator ID•
Event Message Format Ver.•
Event Sensor Type•
Event Sensor Number•
Event Dir Type•
Event Data.•
Clear BMC System Event Log
Select OK and press t<Enter> to clear the BMC system log. Select Cancel to
keep the BMC System log. The options are OK and Cancel.
Caution: After clearing an event log, all information in the log can not be
recovered. Make absolutely sure that you no longer need any data stored
in the log before clearing the BMC Event Log.
Set LAN Confi guration
Set this feature to confi gure the IPMI LAN adapter with a network address.
Channel Number
Enter the channel number for the SET LAN Confi guration command. It is initially
set to [1]. Press <+> or <-> on your keyboard to change the Channel Number.
Channel Number Status
This feature displays the channel status for the Channel Number selected above:
"Channel Number is OK" or "Wrong Channel Number".
IP Address Confi guration
This submenu displays the following IP Address Confi guration information.