User`s manual

4-14
X8DA3/X8DAi User’s Manual
Slot 1 Option ROM ~ Slot 6 Option ROM
Select Enabled to enable the Option ROM of a slot specifi ed, which will allow the
user to boot the computer from a PCI device installed on the PCI slot. The options
are Disabled and Enabled.
LAN1 (i82537V) PXE/LAN2 (i82537L) PXE
Select Enabled to enable onboard LAN1/LAN2 PXE Option ROMs to boot the
computer using a network interface. The options are Enabled and Disabled.
LSI SAS 1068 Option ROM
Select Enabled to enable LSI SAS 1068 Option ROM to boot the computer using
a network interface. The options are Enabled and Disabled.
Super IO Device Confi guration
Onboard Floppy Controller
Select Enable to enable the onboard Floppy Controller. The options are Enabled
and Disabled.
Floppy A
This feature allows the user to select the type of fl oppy drive connected to the sys-
tem as specifi ed. The options are Disabled, 360KB 5 1/4", 1.2MB 5 1/4", 720KB 3
1/2", 1.44MB 3 1/2" and 2.88MB 3 1/2". The default setting for Floppy A is 1.44MB
3 1/2".
Serial Port1 Address/ Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address
for Serial Port 1 or Serial Port 2. Select Disabled to prevent the serial port from
accessing system resources. When this option is set to Disabled, a serial port will
physically become unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port2
are Disabled, 2F8/IRQ3, 3E8/IRQ4, and 2E8/IRQ3.
Serial Port 2 Mode
Use this feature to confi gure Serial Port 2 mode. The options are Normal, IrDA
and ASK IR. IrDA (Infrared Data) is an industry standard for remote control de-
vices. ASK IR (Amplitude Shifted Keying Infrared) is a protocol compatible with
Sharp® branded PDAs and other infrared devices.