User`s manual

Chapter 4: AMI BIOS
4-21
Execute TPM Command
Select Enabled to allow the user to change executable TPM commands and TPM
settings. Select Don't Change to keep the current TPM settings. The options are
Don't Change, Enabled, and Disabled.
TPM Enable/Disable Status
This item displays the status of TPM Enabled/Disabled state.
TPM Owner Status
This item displays the status of TPM Ownership.
IPMI Confi guration
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that
are used to monitor system health and manage the system as a whole. For more in-
formation on the IPMI specifi cations, please visit Intel's website at www.intel.com.
IPMI Firmware Revision
This item displays the current IPMI fi rmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between the sys-
tem management software and platform hardware. This is an informational feature
which displays the status code of the BMC micro controller.
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total number
of BMC System Event entries. To view an event, select an Entry Number and press-
ing <Enter> to display the information as shown on the screen.
Total Number of Entries
•
SEL Entry Number•
SEL Record ID•
SEL Record Type•
Timestamp•
Generator ID•
Event Message Format Ver•