User`s manual

4-8

X8DAH+/X8DAH+-F User’s Manual

C-State package limit setting (Available when Intel® C-State Tech is

enabled)

If set to Auto, the AMI BIOS will automatically set the limit on the C-State package

C1 Auto Demotion

If this feature is enabled, the CPU will conditionally demote C3, C6 or C7 requests

to C1 based on un-core auto-demote information. The options are Disabled and

Enabled.

C3 Auto Demotion

If this item is set to Enabled, the CPU will conditionally demote C6 or C7 requests

to C3 based on un-core auto-demote information. The options are Disabled and

Enabled.

ACPI T State

Select Enabled to allow the BIOS to report processor throttling in ACPI. The options

are Enabled and Disabled.

Advanced Chipset Control

The items included in the Advanced Settings submenu are listed below:

CPU Bridge Conﬁ guration

Request Transaction ID

This feature is used to determine how a QPI Transaction ID is initiated. The options

are Balanced and IO Biased.

QPI Links Speed

This feature selects QPI's data transfer speed. The options are Slow-mode, and

Full Speed.

QPI Frequency

This selects the desired QPI frequency. The options are Auto, 4.800 GT, 5.866GT,

6.400 GT.

QPI L0s and L1

This feature allows QPI to use lower power settings. L0s and L1 are automatically

selected by the motherboard. The options are Disabled and Enabled.