User`s manual

Chapter 1: Introduction
1-7
System resource alert via Supero Doctor III
ACPI Features
Slow blinking LED for suspend state indicator
Main switch override mechanism
ACPI Power Management
Keyboard Wakeup from Soft-off
Onboard I/O
Intel ICH10R supports six SATA2 ports (with RAID0, RAID1, RAID10, RAID5
supported in the Windows OS Environment, and RAID0, RAID1, RAID10 for
Linux Platforms) (Note 1)
Intel 82576 Gigabit Ethernet controllers supports Giga-bit LAN1/2 ports
A PHY chip supports the Dedicated IPMI LAN (X8DAH+-F only) (Note 2)
One VGA Port supported by the Winbond WPCM 450R BMC Controller
(X8DAH+-F only)
PS/2 mouse/keyboard ports, one COM port and one Serial header
Up to ten USB 2.0 (Universal Serial Bus) (six Backpanel USB Ports, and four
Front Panel/Front Accessible USB connections)
Super I/O: Winbond W83627DHG
ALC888 Audio Controller supports 7.1 HD Audio with Line-in, Line-out and
Microphone, Backpanel Audio and CD connections
Two Internal1394 headers
One EIDE Ultra DMA/100 bus master interface supports UDMA Mode 5 and
PIO Mode 4
IPMI 2.0 with full KVM support (X8DAH+-F only)
(Note 2)
Other
Console redirection
Onboard Fan Speed Control by Thermal Management via BIOS
CD/Diskette Utilities
BIOS ash upgrade utility and device drivers
Dimensions
Ext. ATX 13.68" (L) x 13.00" (W) (347.47 mm x 330.20 mm)
Note 1: For more information on SATA HostRAID con guration, please
refer to the Intel SATA HostRAID User's Guide posted on our website @
http://www.supermicro.com/support/manuals/.
Note 2: For more information on IPMI con guration, please refer to the
Embedded IPMI User's Guide posted on our website @ http://www.super-
micro.com/support/manuals/.