User`s manual

2-22
X8DA6/X8DAE User's Manual
P2-DIMM1A
JWOL
CD1
J27
JBT1
JWD1
JPS1
JI2C2
JI2C1
JPI1
JPI2C1
JD1
JOH1
JPW3
FAN8 (CPU1 Fan)
P2-DIMM1B
P1-DIMM1B
P1-DIMM1A
P1-DIMM2B
P1-DIMM2A
P1-DIMM3B
SAS0~3
FAN2
FAN4
FAN3
FAN7/CPU2
FAN1
P1-DIMM3A
KB/MS
USB
0/1
/2/3
COM1
COM2
LAN1/2
Audio
I-SATA1
I-SATA0
I-SATA3
I-SATA5
I-SATA2
I-SATA4
FLOPPY
USB6/7
USB4/5
P2-DIMM2A
P2-DIMM3A
P2-DIMM2B
P2-DIMM3B
HD
BIOS
JPW1
PWR SMB
CPU2
CPU1
Intel 5520
IOH-36D
Intel
ICH10R
South Bridge
LSI
2008
SAS CTRL
82574
LAN
CTRL
82574
LAN
CTRL
Audio
CTRL
JL1
X8DA6/E
Rev. 2.01
S/IO
LE1
FAN6
FAN5
JPW2
Slot6 PCI-E 2.0 x16
Slot4 PCI-E x4
Battery
Slot1 PCI-X 133/100MHz
Slot2 PCI-X 133/100MHz
Slot3 PCI-X 133/100MHz
JPAC1
CNF_1
CNF2_2
USB8
JLPC80
T-SGPIO2
T-SGPIO1
JIBTN1
SAS4~7
SP1
SPKR
FP Control
JF1
LED1
Slot5 PCI-E 2.0x4
Slot7 PCI-E 2.0x4
PXH
CD1
JPL2
AUDIO
JPL1
Audio FP
2-6 Connecting Cables
ATX Power Connector
A 24-pin main power supply
connector(JPW3) and two 8-pin CPU
PWR connectors (JPW1/JPW2) are
located on the motherboard. These
power connectors meet the SSI EPS
12V specifi cation. For the 8-pin PWR
(JPW1/JPW2), please refer to the item
listed below.
Processor Power Connector
In addition to the Primary ATX power
connector, the 12V 8-pin CPU PWR
connectors at JPW1/JPW2 must also
be connected to your power supply.
See the table on the right for pin
defi nitions.
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
12V 8-pin Power Con-
nector
Pin Defi nitions
Pins Defi nition
1 through 4 Ground
5 through 8 +12V
A. 24-pin ATX PWR
B/C.8-pin Processor PWR
(Required)
A
B
C
Warning: To prevent damage to your power supply or mother-
board, please use a power supply that contains a 24-pin and
two 8-pin power connectors. Be sure to connect these power
connectors to the 24-pin and the two 8-pin power connectors on
your motherboard for adequate power supply to your system.
Failure to do so will void the manufacturer warranty on your
power supply and motherboard.